Toyota Seal Packing Black is silicone liquid gasket. Rubber like cured material which has good heat resistance, oil resistance, and low temperature resistance.
- Gasket sealant for engine oil, Long Life Coolant & Super Long Life Coolant
- Joint surface of Oil Pan, Cam Housing and Semi Circular Plug etc.)
- Do not use for gasoline sealant.
- Includes nozzle
- Includes squeezing tool tool to ensure maximum use of product
- Silicone compound
How to apply
- Use for prescribed purpose only
- Tack free time will be about 3 minutes (depending on conditions)
- After application, assemble parts within 3 minutes
- For proper use of this material, check teh repair manual for the vehicle.
- Clean up the material surface to be free from old gasket, water grease and dust.
- Apply this material on the adherent surface. If application is for Oil Pan, cut included nozzle to be 2mm inside diameter OR if application is for Cam Housing cut included nozzle to be 5mm inside diameter and connect to the tube, and apply this material carefully with the included tube squeezing tool.
- If application is for a flange, overflow material must be located outside of the flange.
- Remove the material in the nozzle after use.
- If hardened to the nozzle, make a hole using an item such as a screw driver.
Storage & Waster
- Avoid storing in direct sunlight.
- Store in a dry location under 25⁰C
- Seal cap tightly after use
- Discard as industrial waste